Operating The Product - Bosch Rexroth Simulator PRC 7000 Betriebsanleitung

R911344640 / 01 | Simulator PRC7000
2.6.5

Operating the product

High dynamic forces and extremely fast movements
Danger of impacts, bruises, entanglement and burns!
" You should always be aware of the possibility that motions can be
triggered by faults of the system and behave with the appropriate
care and sense of responsibility.
" Do not ever deactivate any safety–relevant functions!
Always stay outside the danger area of the welding system when it
"
is running!
Make sure that moving system elements are halted safely before
"
accessing the danger area of the system!
Robots and fixing elements may generate very high dynamic
forces and extremely fast movements.
Fault reset
Dangerous machine movements possible!
" Prior to acknowledging error messages, make sure that there is
no-one in the hazard area of the welding equipment!
If the start signal is present when an error message is acknowled­
ged, the weld timer will start its program run immediately.
Damaged system parts
Possibility of reduction of safety of persons/systems, function
disturbances/restrictions!
" Before starting to work, subject the plant to a reasonable, practical
check for possible damages (e.g. visual inspection).
Report any damages and malfunctions of the unit to your super­
"
visor and servicing or repair department immediately.
Bosch Rexroth AG
Safety instructions
WARNING
145 / 256