Description Of Performance - Bosch Rexroth Simulator PRC 7000 Betriebsanleitung

R911344640 / 01 | Simulator PRC7000
5.1

Description of performance

• User interface for operation, programming and diagnosis:
- complete graphical user interface PRI7000,
executable on PCs with operating systems Windows 7
(with Microsoft ® .NET Framework 4.5).
- with limited functional scope via WebBrowser.
• optional access protection for operation/programming
- by registration with own user name and own password
• Programming link to PC (PRI7000).
- Standard:
for one individual timer via Ethernet
(e.g. for local programming)
- simultaneous connection with several timers via Ethernet
- Option:
access via WebServer on the control
• Type-dependent I/O connections
(communication with, e.g., robot/PLC):
- parallel (discrete I/O wiring)
- serial (via bus system):
• Welding tasks:
- up to 10000
- symbolic spot addressing is possible.
• Programming of times in millisecond intervals
• Universal adaptability of the welding schedule
- Up to 10 sequences can be configured with separate blocks
- Block types:
-Pre-Conditioning
-Main-Welding
-Post-Conditioning
- A separate current profile can be defined for each sequence
block. The limits can be selected freely by the user.
• Welding modes:
- spot welding
• Closed-loop control modes:
- PHA (phase angle)
- KSR (Constant-current regulation)
- UIR (adaptive controller; optional)
The control modes can be separately configured for each weld time.
• Current monitoring and other monitoring:
- Reference currents can be programmed independent of the regu­
lation command values
- Tolerance band in percent and absolute, with asymmetric pro­
gramming capability
- several monitoring options can be set for each sequence block
- a separate current profile can be defined for each sequence
block. The limits can be selected freely by the user.
Bosch Rexroth AG
Information on this product
Ethernet-IP
ProfiNet
optional other bus systems
159 / 256