Installation And Assembly - Bosch Rexroth Simulator PRC 7000 Betriebsanleitung

150 / 256 Bosch Rexroth AG
General information on damage to property and products
3.2

Installation and assembly

Metal burrs from drilling and sawing work
Possibility of short-circuits, damage to electrical equipment, unex­
pected plant reactions!
" All affected components in the switch cabinet should be well parti­
tioned prior to all work!
Non-compliance will result in the extinction of any warranty
claims.
" Remove all metal burrs carefully after work.
Simulator PRC7000 |
NOTICE
R911344640 / 01