Safety Instructions; On This Section; Intended Use; Inappropriate Use - Bosch Rexroth Simulator PRC 7000 Betriebsanleitung

R911344640 / 01 | Simulator PRC7000
2

Safety instructions

2.1

On this section

2.2

Intended use

2.3

Inappropriate use

This section includes important information on the safe handling of the
described product.
The described product has been developed, manufactured, tested and
documented in compliance with the EU standards.
Nevertheless there is a danger of personal injuries and damage to
property if you fail to observe this section and the safety instruction in
this documentation.
" Therefore read this documentation carefully and fully before you
work with the product.
" Keep the documentation so that all users have access to it any time.
Always provide the product to third parties together with the product
"
documentation.
• The product serves as simulator for PRC7000 Process Resistance
Welding Control.
• The product is only intended for professional/industrial operation
and not for private use.
• The product is intended for operation in industrial environments
(emission class A, group 2) and complies with the following direc­
tives and standards:
Directives
• EMC directive 2004/108/EC
Standards
• EN 62135-2
Intended use also means that you have read and understood the pro­
duct documentation.
This class A equipment is not intended for use in residential loca­
tions where the electrical power is provided by the public low-vol­
tage supply system.
The inappropriate use of the product may lead to operating statuses in
your application which cause physical injury and/or damage to
property.
Any use other than described as "intended use" is "inappropriate" and
therefore inadmissible.
Inappropriate use of the product includes in particular:
• operation in potentially explosive atmospheres,
Bosch Rexroth AG
Safety instructions
WARNING
137 / 256