Icons; Designations; Abbreviations; Table 5: Icons Used - Bosch Rexroth Simulator PRC 7000 Betriebsanleitung

136 / 256 Bosch Rexroth AG
Regarding this documentation
1.3.2

Icons

1.3.3

Designations

1.3.4

Abbreviations

The following icons are used to mark text passages specifically.
Table 5: Icons used
Icon Meaning
This icon indicates a tip or an information. It helps use
and operate the product optimally or understand the
context better.
" This icon indicates the need to observe/perform certain
things.
• This icon indicates an (unsorted) list.
1. This icon indicates a (sorted) list or specific procedure
2.
steps where a certain sequence has to be observed.
3.
The following designations may appear in our documentation:
Table 6: Designations
Designation Meaning
BQR User interface for U/I controller
PE Protective Earth. PE conductor.
PG Programming terminal/welding computer.
PLC Programmable Logic Controller.
PSG Transformer-rectifier unit for PSI types.
Medium-frequency welding transformer 1000 Hz
PRC7000 Process Resistance Welding Control
PRI 7000 Process Resistance Welding Interface
WT Weld timer.
Also referred to as timer, module or resistance weld timer.
Refer to Section 19 from page 249.
Simulator PRC7000 | R911344640 / 01