Bosch Rexroth Simulator PRC 7000 Betriebsanleitung Seite 190

190 / 256 Bosch Rexroth AG
Information on this product
Reset faults and warnings
Initiate PRC7000 reset
Press the "Esc" and "Enter" key.
1.
Arbitrary activation of PRC7000 reset
Possibility of negative effects on the ongoing production!
" Do not ever activate PRC7000 reset during ongoing production.
" PRC7000 reset may be activated by authorized personnel only.
When PRC7000 reset has been activated, welding is no longer
possible until the timer has completely booted! The timer cancels
schedule execution and resets all signal outputs.
Press the B and "Enter" keys simultaneously.
"
The display shows "shutdn-x".
x: seconds remaining until timer reset is activated.
Within the time remaining, activation of this function can be aborted
by releasing the keys.
Simulator PRC7000 |
NOTICE
R911344640 / 01