Simulator Prc7000 Interface Overview; Fig. 3:Interface Simulator Prc7000 - Bosch Rexroth Simulator PRC 7000 Betriebsanleitung

166 / 256 Bosch Rexroth AG
Information on this product
5.2.2.1

Simulator PRC7000 Interface overview

Process interface
Diagnosis module;e.g. for error display, fault reset, ac­
tivating of boot-mode, timer-Reset, among others
(refer to chapter 5.2.3.3)

Fig. 3:Interface Simulator PRC7000

XFE1 general interface slot
Standard:Anybus CC
Alternative:Profinet (refer to 5.2.4
page 190)
XDS1 voltage supply +24V
Stop circuit
HSA
XGM1 Transformer interface
Secondary voltage
Secondary current
Transformer temperature
XGM2 pressure
LEDs
Interface
CU
XGM3 force
PU
Interface
STZ
XGM4 Analog
2x analog ein
2x analog aus
2x digital ein
Simulator PRC7000 |
XGSD1 SD-card
and XFU1 micro-
USB
XFE0 Ether-
net
XFU0 USB0
XFS1 WIC
XFS2 WIC
XGD1 XGD2 XGD3
Discrete IO-block (16 inputs / 8 outputs)
optional via WIC (welding interface controller)
R911344640 / 01