Transport, Setting Up And Installation; Packing; Transport Of The Machine - Parker EO2-FORM F3 Betriebsanleitung

3 Transport, Setting up and Installation

3.1 Packing

By distribution the machine will be packed and transported on a special wood pallet . The machine can
be transported with the help of a crane.
•
Keep all parts of the original packaging for a possibly necessary return transport.
•
For the return transport is only the original packaging to be used. Separate before the dispatch
all attached cables and draw/mobile parts.
•
Attach possibly intended transport locks. Secure all parts approximately slip and for damage

3.2 Transport of the machine

•
In the case of transport with fork-lift truck (without original packaging and / or pallet), the fork-
lift truck may be set only in the guide rails in the machine basic frame.
WARNING!
Take up the machine only at the intended points. The machine is top- heavy.
An centric setting of the fork-lift truck could lead to falling of the machine.
Guide rails
- 25 -