Maintenance, Repair And Trouble Shooting - Parker EO2-FORM F3 Betriebsanleitung

•
Only use genuine EO2-Form tooling provided by Parker.
•
Do not operate the machine without tooling.
•
After switching off the machine the operating personnel must wait until all mobile parts to stand
still and the function lights are expired, - only then the machine may be left.
1.6.3

Maintenance, repair and trouble shooting

The machine may only be repaired by authorized and trained personnel, which can know the manual
and work afterwards!
The servicing tasks defined in the operating manual - tuning, cleaning, lubrication, maintenance,
inspection, ... - must be performed when due.
Before performing the servicing work, you must observe the following:
•
Switch off the central power supply by the main switch, lock the main switch and put up a
warning sign prohibiting switching it on again.
•
Secure all pressure-free switched components against unintentional restarting.
•
Guarantee that for the exchange of larger machine parts an appropriate lifting devices and
load suspension devices are present.
•
Lock the entrance to the work area of the machine and guarantee that no unauthorized
persons in the work area of the machine.
- 14 -