Necessary Qualifications - Parker EO2-FORM F3 Betriebsanleitung

1.3 Necessary qualifications

The machine was designed and built on the basis of a risk analysis and under consideration of all
relevant harmonised standards as well as further national standards and technical specifications.
The machine thus conforms to the current level of technology and guarantees the highest possible
degree of safety.
This level of safety can only be achieved in practice if all necessary measures are observed in dealing
with the machine. It is therefore part of the duty of care of the machine's operator to plan these
measures and check that they are executed correctly.
In particular the operator must ensure that
•
the machine is used only as prescribed
•
the machine is operated only in a fault-free, operational condition and in particular the safety
devices are regularly checked to ensure that they function as stipulated
•
the operating manual is always legible and is available in full at the machine's location
•
all safety instructions and warnings on the machine are visible and legible and are not
removed.
The machine may only be operated by persons who have been specially trained, briefed and
authorised. These persons must be familiar with the operating manual and act in accordance with it.
The respective areas of authority of the operating personnel must be clearly defined.
Trainee operating personnel may at first only work on the machine under the supervision of an
experienced person. Successful completion of the induction period should be confirmed in writing.
All control and safety devices must be operated only by persons who have been suitably instructed.
- 7 -