Tools; Improper Use - Parker EO2-FORM F3 Betriebsanleitung

1.4.2

Tools

Only such tools are permitted, that have been made to our specifications especially concerning
•
construction material
•
heat treatment
•
geometry
The tools are to be installed with the enclosed handling devices surely in the machine, so that fall out
of tools is impossible.
1.4.3

Improper use

The following types of improper use are known to us:
•
Misuse – Use the machine contrary to the approved use, especially concerning:
- use
•
Exceeding limits of operation – Use outside the limits of operation as detail in chapter 1.4.4
•
Failure to follow the operating instructions – Use contrary to the stipulation in the operating
instructions concerning:
- safety
- installation
- operating
- maintenance
•
Faults – Use with obvious faults, especially on
- machine
- tool
- controls
- electrical and hydraulically supply
- 9 -