Connecting The Line Outputs; Aux Connection; Hands-Free Microphone Connection - Renkforce RF-RUDAB1805 Bedienungsanleitung

DAB aerial
• Connect the aerial plug of the included DAB aerial with the golden screw connection at the rear of the car radio.
• Tighten the cap nut for the aerial connection.
b) Connecting the LINE Outputs
The car radio has LINE outputs for connecting a power amplifier.
For the connection of the cinch sockets only use the shielded cinch wires. Use of any other cables may
cause interferences.
Keep the distance of the cables as short as possible.
Do not place the cables near other cables. to avoid interferences in the cables.
To avoid distortions or mismatching that could damage the device, cinch connector must only be connected
to devices with the suitable cinch terminals.
Connect the cinch sockets at the rear of the casing to the power amplifier inputs.
The red socket is a terminal for the right channel
The white socket is a terminal for the left channel
c) AUX Connection
You can connect an external audio device (e.g. portable MP3 player) to the port AUX (17) whose signal is played
back via the speakers.
• Connect the port AUX (17) with the audio output of the external device.
d) Hands-Free Microphone Connection
• Connect the plug of the hands-free microphone to the coupling of the black connection line MIC at the back of the
device.
41