Warranty; General Instructions; Manufacturer Identification; Markings - probst HVZ-ECO Betriebsanleitung

GB HYDRAULIC ROTATORS

1. WARRANTY

The warranty may be considered valid in
compliancewith the contractual and administrative
provisions on the part of the purchaser, and in the
installation and subsequent use of the machine in
compliance with the instructions contained in this
manual.
The manufacturer guarantees that the product was
tested prior to delivery, and it is guaranteed for 12
months from the date of delivery, limited solely to
manufacturing and assembly defects.
The warranty does not cover:
• Labour
• All parts that by their specific use are subject to
wear and tear
• The costs of shipping, inspection, and labour
when the defects found are not attributable to the
manufacturer.
The manufacturer undertakes to repair or replace free
of charge any parts that show to be defective at the
outset. In this regard the judgement expressed by our
Authorised Service technicians will be considered final.
For any dispute, the competent court shall be the court
of Reggio Emilia.
18

2.GENERAL INSTRUCTIONS

2.1 Manufacturer identification

Ferrari International S.p.A. - Via E.Tirelli, 26/a - 42122 – Reggio Emilia Italy
Tel: +39 0522 2387 - Fax +39 0522 238799 - www.ferrariinternational.com

2.2 Markings

The equipment has been constructed in compliance
with the relevant EU Directives applicable at
the moment of its release on the market since
the equipment is compliant to the declaration in
accordance with art. 2, letter a) second point, a specific
self-certification of conformity CE Enc. II A is issued.
The plate applied must be similar to the one shown
below and duly completed.
It is prohibited for the user to remove, alter,
or damage the identification plate.