General Information; Purpose Of The Manual - Angelo Po 1G1PI1E Bedien- Und Installationshandbuch

To find the specific topics of interest to you quickly,
refer to the index at the start of the manual.
This manual is subdivided into two parts.
st
1 part: contains all information necessary
for general readers, i.e. for users of the appli-
ance.

PURPOSE OF THE MANUAL

The manufacturer has produced this manual, which
forms an integral part of the appliance, to provide
the necessary information for those authorised to
interact with it during its working life.
As well as adopting good practices for use, the
manual's intended readers must read it thor-
oughly and apply its instructions to the let-
ter.This information is provided by the
manufacturer in the original language (Italian)
and is translated into other languages to meet
legal and/or business requirements.
Reading this information will avoid health and sa-
fety risks to people and fi nancial losses.
Keep this manual in a clearly identified safe place
IT
throughout the working life of the appliance, so that
it will always be available when required for consul-
GB
tation.
DE
MANUFACTURER AND APPLIANCE IDENTIFICATION
The nameplate shown here is fitted directly to the
FR
appliance. It contains references and all essential
information for operating safety.
ES
Q
English

GENERAL INFORMATION

INSTRUCTIONS AND WARNINGS FOR THE READER
A B C
L M N P
nd
2 part: contains all the information necessary
for special categories of reader, i.e. all skilled
operators authorised to handle, transport, in-
stall, service, repair and scrap the appliance.
While users are instructed to refer to the 1
nd
ly, the 2 part is addressed to skilled operators.
They may also read the 1
picture of the information provided if necessary.
The manufacturer reserves the right to make
changes without any obligation to provide any prior
notice.
A number of symbols have been used to highlight
particularly important parts of the text or important
specifications. Their meaning is as defined below.
Caution - warning
Indicates that suitable procedures must be
adopted to avoid putting people's health and
safety at risk or causing economic losses.
Important
Indicates particularly important technical in-
formation which must not be overlooked.
A)Appliance model.
B)Type of customisation.
C)Manufacturer identification.
D)Insulation class.
D E F
- 2 -
st
st
part for a more complete
S
G H
R
1
part on-