Parkside PLVA 40-Li A1 Originalbetriebsanleitung Seite 26

GB IE
Preparations:
• Read the instructions carefully.
Familiarise yourself with the
controls and how to use the ma-
chine correctly.
• Note that the user is responsible
for any accidents or risks to oth-
ers and their property.
• The implement is not suitable for
use by children.
• Children and persons with lim-
ited physical, sensory or mental
capabilities or inadequate expe-
rience and knowledge, or per-
sons who are not familiar with
the instructions, should never be
allowed to use the machine
• Never start up the implement
while other people, but espe-
cially children and domestic
pets, are in the vicinity.
• Check the area on which the im-
plement is to be used. Remove
all stones, sticks, wire and other
foreign bodies that could be
caught up and flung out.
Never use the implement to
level out uneven patches.
• Always wear appropriate pro-
tective work clothes and firm
shoes with non-slip soles, strong
long trousers, ear defenders
and goggles. Never operate the
implement while bare footed or
when wearing open sandals.
Avoid wearing loose clothing
with hanging cords or ties.
The protective devices and your
personal protective equipment
will protect yourself and other
people and ensure that the
equipment can be smoothly op-
erated
26
• Never operate the implement
if it is damaged, incomplete or
has been modified without the
consent of the manufacturer.
Never work with damaged or
missing protective devices (e.g.
starting lever, unlocking knob,
impact protector). Never disen-
gage protective devices (e.g.
by tying the starting lever).This
ensures that the equipment re-
mains safe.
• Before starting the equipment, en-
sure that no objects or branches
are pushed into the blade open-
ing, that the equipment is stand-
ing stably and that the work-
space is tidy and not blocked.
• If your device demonstrates
unusual vibration or noise when
switching on, pull the ignition
key, remove the batteries from
the device and check the cutting
roll. Ensure that no remains of
chopped matter are blocking
the cutting cylinder or jammed
between the blades. If you find no
problems, return the equipment to
a customer service centre.
• If the blades no longer cut cor-
rectly or if the motor is over-
loaded, check all the parts of
your equipment and replace the
worn parts. If a more extensive
repair is required, contact a cus-
tomer service centre.
• Use the machine in the recom-
mended position and on a
solid, flat surface only.
• Do not operate the machine on
paved or gravelled areas where
material flung out can cause in-
juries.