Herunterladen Inhalt Inhalt Diese Seite drucken

Residual Risks; Assembling Instructions; Assembling The Handle Bar; Mounting And Emptying - Parkside PLVA 40-Li A1 Originalbetriebsanleitung

Akku-vertikutierer/rasenlüfter
Vorschau ausblenden Andere Handbücher für PLVA 40-Li A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
IE

Residual Risks

There will always be residual risks
even if you operate this electrical
tool according to the instructions.
The following hazards may occur in
connection with the type and design
of this electric tool:
a) a) Cutting injuries
b) Hearing damage if suitable ear
protection is not worn.
c) Health injuries resulting from the
effect of vibration on the hands
and arms in the event that the
device is used over a longer pe-
riod of time or is not used and
maintained properly.
Warning! During operation,
this power tool produces an
electromagnetic field. Under
certain circumstances, this
field may negatively affect
active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, we recommend that
individuals who wear medi-
cal implants should consult
their doctor and the manu-
facturer of the implant before
operating the machine.
30

Assembling instructions

Always pull the ignition key (
and remove the batteries before
working on the device.
Ensure during assembly that the
machine cable (
squeezed and that it has sufficient
play.
Assembling the
B
handle bar
1. Attach the lower bar (6) to the appli-
ance housing (9) and fasten it using
the two quick-release levers and wash-
ers (7). The smooth side of the washer
should point towards the quick-release
lever; the grooved side should point
towards the device.
2. Screw both central bars (5) with
the screws, quick-release levers and
washers (4) to the lower bar (6). The
smooth side of the washer should point
towards the quick-release lever; the
grooved side should point towards the
device.
3. Screw the upper handlebar (3) with
the screws, quick-release levers and
washers (4) to both central bars (5) to
fasten.
4. Fasten the machine cable (15) to the
bar using the machine cable terminals
(11).

Mounting and emptying

C

the collection bag

WARNING: Never operate
the implement without the
impact protector. Danger of
Injury!
21)
15) is not
A

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis