Electrical Safety - Parkside PLVA 40-Li A1 Originalbetriebsanleitung

All work that has not been listed
in these Instructions must only be
carried out by authorised servic-
ing agencies.
• Treat the implement with the
greatest care. Always keep the
tool clean for better and safer
work. Follow the maintenance
instructions.
• Never overload the implement.
Always work within the speci-
fied capacity range. Do not use
low-power machines for heavy-
duty work. Do not operate the
implement for purposes for
which it is not intended.
• Check the collection unit regu-
larly for wear or loss of function.
• Replace worn or damaged parts
for safety reasons.
• When using the machine with
several prong attachments,
beware that moving one prong
attachment can lead to the other
prong attachments rotating.
• When setting the machine,
make sure your fingers do not
become caught between the
moving prong attachments and
stationary parts of the machine.
• Allow the motor to cool down
before parking the machine for
a longer period.
• When servicing the prong attach-
ments, beware that the prong
attachments can be moved even
when the drive is switched off.
• Replace worn or damaged parts
for safety reasons. Use only origi-
nal spare parts and accessories.
• If the machine is stopped to
service, inspect, store or replace
an accessory part, switch off
the drive, pull the ignition key,
remove the battery from the de-
vice and make sure that all mov-
ing parts have come to a com-
plete stop. Allow the machine to
cool down before carrying out
inspections, settings etc. Treat
the machine with care and keep
it clean.

Electrical safety:

CAUTION! The following states
how to avoid accidents and
injuries due to electric shock:
• Avoid body contact with
earthed parts (e.g. metal fences,
metal posts). There is an in-
creased risk of electric shock if
your body is earthed.
• Do not expose electric tools to
rain or wet conditions. The pen-
etration of water into an electric
tool increases the risk of electric
shock.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric
shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 20 V Team series. A
detailed description of
the charging process
and further informati-
on can be found in the
separate operating inst-
ructions.
GB IE
29