Bosch DVA-08E Schnellstartanleitung Seite 84

84 en | Changing the Configuration via a Web Browser
F.01U.027.800 | V5 | 2010.06
Downloaded from www.Manualslib.com
4. In the SCSI ID(s) box, select the SCSI ID you want to use.
5. In the LUN(s) box, select the LUNs you want to use.
6. In the Logical Drive(s)/Volume(s) for Primary pane, select the logical drive.
7. In the Logical Drive(s)/Volume(s) for Primary pane, select a partition.
8. Click MAP LUN.
NOTICE!
In the navigation tree, you can check the drive status.
Click Information, and then click Task Under Process.
To remove a logical drive:
1. In the navigation tree, click Configuration, and then click Host LUN Mapping.
2. In the Host LUN Mapping pane, select the configured LUN.
3. Right click the selected LUN, and then click Remove LUN MAP. The application opens a
dialog box where you accept the changes.
4. Click OK. The LUN Mapping is no longer listed in the Host LUN Mapping pane.
5. In the navigation tree, click Existing Logical Drive.
6. In the Logical Drives pane, select the logical drive you want to delete.
7. Right-click the selected logical drive, then click Delete Logical Drive. The application
opens a dialog box where you can accept the changes.
8. Click OK. The Logical Drive is no longer listed in the Logical Drives pane.
NOTICE!
For more information see Bosch RAIDWatch user manual.
manuals search engine
Quick Installation Guide
RAID Subsystem DVA-08E, -08K, -16K
Bosch Sicherheitssysteme GmbH