Changing The Configuration Via A Web Browser; Changing An Ip Address - Bosch DVA-08E Schnellstartanleitung

82 en | Changing the Configuration via a Web Browser
10
10.1
F.01U.027.800 | V5 | 2010.06
Downloaded from www.Manualslib.com

Changing the Configuration via a Web Browser

Changing an IP Address

The Bosch RAIDWatch application can be used to change the IP address of the subsystem.
The Bosch RAIDWatch application is pre-installed directly on the subsystems drive and can be
accessed with a common standard browser. Alternatively the Bosch RAIDWatch application
can be installed on a host PC (see Section 11 Using Bosch RAIDWatch on the Host Computer).
NOTICE!
If the RAID is deleted or corrupted you need to re-install the Bosch RAIDWatch application on
the system. Rerun the Bosch RAIDWatch setup from your CD, select Custom, and then click
Stand-alone (on Subsystem).
The Java Runtime Environment (JRE) 1.42 or higher is required. Using the web interface, you
have to install the JRE on your PC first. The setup for the JRE is on the CD included with the
product.
To change an IP address via a Web browser:
1. Open the Web browser.
2. Type the unit's IP address in the address bar, and then click the Go button.
A Java Applet is loaded and the Bosch RAIDWatch application starts.
Figure 10.1 Logon screen
3. In the IP Address box, type or select the IP address.
4. Select the Enable SSL check box if you want to use the Secure Sockets Layer (SSL)
security option.
5. In the Username list, click Configuration.
6. In the Password box, type the password if needed (factory default: no password).
7. Click OK. The computer opens the Bosch RAIDWatch application.
Figure 10.2 Bosch RAIDWatch application
manuals search engine
Quick Installation Guide
RAID Subsystem DVA-08E, -08K, -16K
Bosch Sicherheitssysteme GmbH