Bosch DVA-08E Schnellstartanleitung Seite 91

RAID Subsystem DVA-08E, -08K, -16K
Bosch Sicherheitssysteme GmbH
Downloaded from www.Manualslib.com
11. Right-click Unallocated, and then click New Partition. The New Partition Wizard starts.
12. In the New Partition Wizard, click Next.
13. Click Primary partition, and then click Next.
14. In the Partition size box, the maximum size of the disk is automatically entered. Click
Next to continue.
15. Make sure that the Assign the following drive letter option and a drive letter is selected.
Click Next to continue.
16. In the File system box, click NTFS. Select the Perform a quick format check box, and
then click Next. The drive is formatted as NTFS.
17. Click Finish.
18. Repeat the same procedure for all unallocated disks.
19. If the formatting process was successful, the volume name, the drive letter, the NTFS file
system and Healthy is displayed in the drive pane.
20. Make sure that the drives are available in Windows. To check the availability, open the
Windows Explorer, and then click the drives you assigned before.
21. On the Start menu, point to All Programs, and then click DiBos. The DiBos application
opens.
22. In the System menu, click Configuration to open DiBos configuration.
23. In the navigation tree, click Drives and select the drives on the RAID subsystem used for
recording the video data.
Note: The internal drive must be unselected.
24. Click Save.
manuals search engine
Quick Installation Guide
Connecting a Digital Video Recorder | en
F.01U.027.800 | V5 | 2010.06
91