Bosch DVA-08E Schnellstartanleitung Seite 98

98 en | Connecting a Digital Video Recorder
F.01U.027.800 | V5 | 2010.06
Downloaded from www.Manualslib.com
15. Click Assign the following drive letter, click F to assign this letter to the selected drive,
and then click Next.
NOTICE!
You can use another drive letter instead of F. This depends on the VIDOS NVR installation. The
VIDOS NVR allows to use one drive letter only upon installation.
16. Click Format this volume with the following settings, and in the File system box click
NTFS. Click the Perform a quick format check box, and then click Next.
17. Click Finish. The drive is formatted as NTFS.
18. Make sure that the drives are available. To check the drives, open the Windows Explorer
and click the drives you assigned before.
19. Install VIDOS NVR service or restart the service if already installed.
20. To verify the proper installation open the browser, type the IP address (http://
<NVRserver>/status) in the address bar, and then click GO. The browser opens the
following dialog box.
21. Make sure that the disks are proper assigned and recording has started. You can see it on
the status screen.
manuals search engine
Quick Installation Guide
RAID Subsystem DVA-08E, -08K, -16K
Bosch Sicherheitssysteme GmbH