Installation and operating manual
4.3.2 Radio remote control
Illustration 12
Item
Name
1
Rubber cover
2
Indicator light
With single speed:
3
Button
4
Button
With two speeds:
3
Button
4
Button
5
Indicator light
6
Button
7
Button
8
Button
9
EMERGENCY stop button
10
Receiver
11
Charging equipment
EN-26
Function
–
Green: Fully charged, ready for operation
Changes from green to red (together with 3 beeps): 10 % battery capacity
Red: Needs to be charged soon
Move load upwards / pull wire rope:
–
Press and hold the button
Move load downwards / release wire rope:
–
Press and hold the button
Move load upwards /pull wire rope:
–
Press the button halfway and hold:
slow
–
Press the button completely and hold:
fast
Move load downwards / release wire rope:
–
Press the button halfway and hold:
slow
–
Press the button completely and hold:
fast
Next to each button (lights up if button is pressed)
without function
Activate radio remote control:
Press button 7 and 8
Switching on: Unlock the button
Interrupt the power supply: Press the button in.
This button has the same function as the EMERGENCY stop button on the control unit
when the remote control is activated.
Receives radio signals from the transmitter and forwards the control commands to the
control box.
Connection on the backside
G1035.4 – 01/2019