Overview; Delivery Status; Scope Of Delivery; Equipment Description - Tractel tirak L 500 P Serie Original-Montage- Und Betriebsanleitung

3

Overview

3.1

Delivery status

The equipment is delivered fully assembled.
3.2

Scope of delivery

Hoist with control and connecting cable (hard-wired) in accordance with the order specifications

 Original assembly and operating instructions manual
 Wiring diagram
 Test certificate
 CE Declaration of Conformity
Limit switch for switching off the lifting motions in accordance with the order specifications

3.2.1 Optional scope of delivery
 Pendant control, pluggable
 Control unit, pluggable
 Diverter pulley
Adapter, eye hook or master link

 Brush attachments for cleaning the wire ropes
Logbook

 tirak wire rope in accordance with the order specifications
TM
 Radio remote control, hard-wired or pluggable in accordance with order specifications
Other Tractel® products available on request.
3.3

Equipment description

3.3.1 Intended use

Hoist
The hoist is intended for lifting and lowering temporarily installed suspended access equipment for persons and their equipment.
The hoist is operated by an electric motor. Operation is carried out on-site via a control unit.
The hoist must only be used with an original wire rope approved for the application by the manufacturer Tractel. The diameter of the
wire rope is specified in this manual and on the nameplate.
Hoists for manual emergency operation with hand crank may only be operated with the hand crank in emergencies (power failure,
rescue).
The wire rope is inserted on the motor side. This corresponds to the load side of the wire rope. The outfeed of the wire rope is the
loadless side of the wire rope. This loadless side of the wire rope may be loaded with a maximum of 100 kg (e.g. by pre-tensioning the
wire rope).
Temporary suspended platforms (TSAE) must be equipped with a fall arrest device, which secures the load, for example, on a safety
wire rope against falling.
Product purpose
The product is not intended for private use.
The precise intended use will be defined by the operator or the equipment manufacturer.
G1035.4 – 01/2019
Installation and operating manual
EN-19