Changing The Stroke Measuring System - SCHUNK LDM Serie Montage- Und Betriebsanleitung

Check the initial
tension

7.8 Changing the stroke measuring system

CAUTION
After adjusting the rollers check the entire track to ensure all of
the rollers are free from play.
Track width
1. Apply marking paste to all guideways
2. Move the guided slides
3. Check the running track width – track width B = 4 – 5mm
CAUTION
Due to the adjustment work required, the stroke measuring
•
system should only be changed by specialist personnel.
06.00 | LDM | Assembly and Operating Manual | en | GAS360926
Maintenance and repair work
119