Applicable Documents; Warranty; Scope Of Delivery; Accessories - SCHUNK LDM Serie Montage- Und Betriebsanleitung

General

1.1.2 Applicable documents

1.2 Warranty

1.3 Scope of delivery

1.4 Accessories

78 06.00 | LDM | Assembly and Operating Manual | en | GAS360926
• General terms of business
• Start-up instructions
• Technical data for the module given on motor data sheet and
program overview
• Documentation for the used drive regulator
• Assembly instructions for the automated system in which the
module is to be used
• Machinery Directive 2006/42/EC
• Minimum safety and health requirements for the use of work
equipment by workers at work 2009/104/EC
• Accident prevention regulations and safety rules
• Other relevant safety rules
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the applicable documents,
Applicable documents
• Observe the ambient conditions and operating conditions,
Ambient conditions and operating conditions
• Observe the maximum service life.
• Compliance with the specified maintenance and repair tasks
Maintenance and repair work
Parts touching the workpiece and wear parts are not included in
the warranty.
The scope of delivery includes
• Linear motor shaft LDM in the version ordered
• Documentation including basic parameter record on data
carrier
• Enclosed pack with centering sleeves
The following accessories, which must be ordered separately, are
required for the product:
• Drive controller
• Cable set
[ 78]
}
Technical Data
[ 109]
}
[ } 81]
[ 88]
}