Overview; Changing The Motor Housing - SCHUNK LDM Serie Montage- Und Betriebsanleitung

7.1 Overview

Overview linear motor axes
1 End plate
4 Motor
connector

7.2 Changing the motor housing

WARNING
Danger of crushing!
Parts of the body may become crushed if the motor is attracted
by the powerful magnets.
Persons must keep out of the danger zone
•
Always assemble and disassemble motors with lifting screws
•
WARNING
Danger of crushing!
Motors and steel parts are attracted by the secondary part.
Do not place motors and metal parts in the vicinity of the
•
secondary part.
WARNING
Risk of burns through contact with hot surfaces!
Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.
For all work in the vicinity of hot surfaces, wear safety gloves.
•
Before carrying out any work, make sure that all surfaces have
•
cooled down to the ambient temperature.
06.00 | LDM | Assembly and Operating Manual | en | GAS360926
Maintenance and repair work
2 Guide block
5 Guide blade
carrier
3 Motor housing
6 Measuring
system
111