Basic Safety Notes; Intended Use; Reasonably Foreseeable Misuse; Constructional Changes - SCHUNK LDM Serie Montage- Und Betriebsanleitung

Basic safety notes

2.1 Intended use

2.2 Reasonably foreseeable misuse

2.3 Constructional changes

2.4 Spare parts

80 06.00 | LDM | Assembly and Operating Manual | en | GAS360926
2 Basic safety notes
The product is exclusively designed for linear movement of useful
loads into any position where the load does not react in a manner
endangering persons, property or the environment as a result of
this manipulation.
• The product may only be used within the scope of its technical
data, Technical Data
• The product is intended for installation in a machine/system.
The applicable guidelines must be observed and complied with.
• The product is intended for industrial and industry-oriented use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
The product is not suitable for the following applications:
• Use as passenger or animal transportation
• Operation of the motor directly on the network
• Operation under water
• Operation in areas where there is a danger of explosion
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
[ 88].
}