probst SH-3500-B Betriebsanleitung Seite 120

SAFETY INSTRUCTIONS
 The load (stone slab) to be picked
up and transported must be
sufficiently rigid. Otherwise, risk of
breakage can result during lifting.
 Stone slabs must not bend when
lifted under any circumstances.
Particular attention must be paid in
the case of thin and large-format
stone slabs.
 Generally, the load (stones slab) is
only to be sucked in the middle,
otherwise the load hangs diagonally
under the device which may cause a
breaking of the load - especially
when lifting large stone slabs with a
small suction plate.
 Standard suction plates are not
suitable for transporting glass
sheets.
10