Operation On A Pc; Getpos Software; Installation And Configuration - Marzhauser Sensotech Profiler ST Betriebsanleitung

All manuals and user guides at all-guides.com
PROFILER ST
7

Operation on a PC

7.1 GetPos Software

Using the GetPos software, you can send position values to
your PC, and have the option of saving them in an ASCII text
file (.txt) or an Excel-compatible file (.csv) for further processing.
To send position values from the PROFILER ST to your PC, and
to process them with GetPos, the PROFILER ST and your PC
must be correctly connected and configured.
»
7.1.1

Installation and Configuration

X
1 Create a new folder on your hard drive, to which you would
2 Insert the installation CD in the CD drive.
3 Open the ..\Software\GetPos folder.
4 Copy the file GetPos.exe to the folder on your hard drive
GetPos is now installed on your PC.
X
To configure GetPos, you need to identify the COM interface,
which is used by the PROFILER ST.
1 Open the Device Manager:
Chapter 5.2 Establishing the Connection to a PC, page 116
Installing GetPos
like to install GetPos. Name the folder, e.g. GetPos.
which you have created in step 1.
Identifying the COM interface
Windows 2000, Windows XP: Start
•
System Hardware


Device Manager

Operation on a PC
Control Panel

155