Marzhauser Sensotech Profiler ST Betriebsanleitung Seite 148

All manuals and user guides at all-guides.com
Operation
Up arrow
ESC
Here you can find information on configuring and enabling the
position correction:
»
Encoder
6.7.6
In the Encoder 1/2 menu, you can select different evaluation
options for the connected measuring systems. In addition, with
the choice of encoder types you decide which connected mea-
suring systems are evaluated by the PROFILER ST.
NOTICE
Incorrect measurement from wrong configuration!
When configuring the PROFILER ST, you must indicate the cor-
rect encoder type for the connected measuring systems.
Incorrect position values from relocating the machine
zero or changing the encoder type!
Position correction values are valid as long as the location of
the machine zero and the chosen encoder type are unchanged.
If you, after entering position correction values,
•
•
•
•
you must delete all previously stored position correction values
and enter new position correction values.
148
Chapter 6.5 Using the Position Correction, page 130
relocate the machine zero,
approach another reference mark to set the machine zero,
change the function for determining the machine zero or
change the encoder type,
switch to Position Correction 1/2 menu
return to Setup menu
Operating Manual