Marzhauser Sensotech Profiler ST Betriebsanleitung Seite 144

All manuals and user guides at all-guides.com
Operation
Offset from
machine zero
SAVE
Up/down arrow
ESC
If the Set machine zero with button function is selected, the
Zero position value with button function is disabled until the
machine zero is set one time with
PROFILER ST is switched on.
144
indicate the deviation between the
machine zero and the zero point of the
sample/workpiece (function not avail-
able for absolute measuring systems/
encoder type SSI)
Function description: To exactly
approach a determined zero point of
your sample/workpiece after setting/
approaching the machine zero, indicate
the Offset from machine zero (devi-
ation between machine zero and zero
point of your sample/workpiece).
Note: The value can only be entered if
you have selected a function for setting
the machine zero.
save settings
switch to the Origin menus of the other
axes
return to Setup menu
,
Operating Manual
or after the