Establishing An Rs-232 Connection - Marzhauser Sensotech Profiler ST Betriebsanleitung

All manuals and user guides at all-guides.com
PROFILER ST
5.2.2

Establishing an RS-232 Connection

WARNING
Possible electric shock and equipment damage from con-
necting inappropriate peripherals!
The PROFILER ST is insulated by the power supply. Ensure that
no dangerous voltages or currents are induced by peripheral
devices in the PROFILER ST.
X
1 Switch off the PROFILER ST (ON-OFF switch to position 0).
NOTICE
Possible equipment damage from commissioning/decom-
missioning with existing power connection!
Disconnect the PROFILER ST from the mains before connecting/
disconnecting measuring systems, a PC or other periph erals to/
from the PROFILER ST.
2 Disconnect the power supply of the PROFILER ST from the
3 Connect the RS-232 port of the PROFILER ST with a serial
4 Switch on the PC.
5 Connect the power supply of the PROFILER ST to the mains.
6 Switch on the PROFILER ST (ON-OFF switch to position I).
The PROFILER ST is now connected with your PC.
It is not necessary to install drivers with an RS-232 connection.
Establishing the connection to a PC using an RS-232
cable
mains.
port of your PC. Use the RS-232 interface cable for this.
Commissioning
119