Marzhauser Sensotech Profiler ST Betriebsanleitung Seite 115

All manuals and user guides at all-guides.com
PROFILER ST
The display lights up. The PROFILER ST starts the boot sequence
and is operational after 1–2 seconds.
10 Call the Setup menu.
11 In the Encoder menu, configure the 3 connected measuring
12 In the Origin menu, configure the 3 connected measuring
13 If needed, perform a position correction for the 3 con-
Commissioning is complete. You can now perform measure-
ments with the PROFILER ST.
If needed, adapt the PROFILER ST to your individual needs:
»
systems which are to be evaluated by the PROFILER ST.
»
Chapter 6.7.6 Encoder, page 148
systems which are to be evaluated by the PROFILER ST.
»
Chapter 6.7.3 Origin, page 140
nected measuring systems which are to be evaluated by the
PROFILER ST.
»
Chapter 6.7.5 PosCorr (Position Correction), page 146
Chapter 6.7 Configuring the PROFILER ST, page 137
Commissioning
115