Connecting The Pneumatic System En - Abicor Binzel TCS-Compact Betriebsanleitung

TCS-Compact
6.6 Connecting the pneumatic system
For the supply, a compressed air-hose with a min. inner width of
housing by means of a screw connection (not included in the delivery). A compressed air shut-off valve in
the supply line is recommended. This allows the TCS-Compact to be quickly and simply depressurized in
order to carry out any installation and maintenance work.
Cleaning stroke cylinder
up down
Z1 (Air motor)
Y1
4
2
12
14
12
14
5 1 3
Connecting the pneumatic system
Fig. 22
Air motor
M
1
S1
Clamping / cutter
close
up
Z2
Y2
4
4
2
14
45° 14
14
14 12
5 3
1
ø
6mm is required; it is fastened to the
Vacuum output
Compressed air
S2
Y4
2
14
10
1 3
Y3
2
12
12
5
1 3
6 Putting into operation
Return
Anti-spatter
Suction
minimum 6bar
EN - 27