Abicor Binzel TCS-Compact Betriebsanleitung Seite 43

TCS-Compact
Compressed air connection DN 10
1
Compressed air connection
Fig. 7
Connect the device via the compressed-air hose.
The operating pressure should be 6 bar.
If the compressed air supply is under 6 bar, the cutting capacity of the wire cutter and the speed of the
compressed air motor will be reduced.
This will reduce the performance of the torch cleaning station.
NOTE
• We recommend to operate the device with cleaned and oiled compressed air.
• An applicable maintenance unit is available as accessory.
6 Putting into operation
1
EN - 13