Setting Up The Clamping Position En - Abicor Binzel TCS-Compact Betriebsanleitung

TCS-Compact
Fig. 16 Position bellows
6.2.5 Setting up the clamping position
NOTE
• Only use clamping prisms and milling cutters adjusted to the gas nozzle diameter.
 See Fig. 17 Setting up the clamping position on page EN-21
1 Clamping prism
Gas nozzle
2
Setting up the clamping position
Fig. 17
1
Tool axis
5
3 Cleaning station
Gas nozzle clamping device
4
6 Putting into operation
2
3
4
5 Clamping position
EN - 21