Wire Cutting Device Sub-Assembly En; Sub-Assemblies Accessories / Options En - Abicor Binzel TCS-Compact Betriebsanleitung

TCS-Compact
5.2 Wire cutting device sub-assembly
1
4
Wire cutting device
1
Protection plate
2
DAV wire cutting device sub-assembly
Fig. 6
5.3 Sub-assemblies accessories / options
Anti-twist fastening with a cylinder head screw M8x20 in the clamping device (depending on the
Prism
diameter of the gas nozzle).
The milling cutter dimensions are determined based on the gas nozzle and torch geometry for an
Milling cutter
immersion depth up to 50 mm. Available for all standard WH and robot torch versions.
Tab. 12 Accessories
Maintenance unit
Options
Tab. 13
Wire cutter closed
Movable cutting plate
3
ID 830.0075
Consists of a filter regulator and oiler.
The maintenance unit separates solid particles from the compressed air and adds atomized oil for
lubricating the pneumatically driven components.
Wire cutter open
2
4
5 Functional description
3
Fixed cutting plate
EN - 11