Identification; Eu Declaration Of Conformity En; Responsibilities Of The User En; Product Description - Abicor Binzel TCS-Compact Betriebsanleitung

TCS-Compact

1 Identification

The cleaning station TCS-Compact is used in industry and in the trade for automatic cleaning of the gas
nozzle interior of MIG/MAG welding torches. It serves as preventive measure to extend the service lives of
torch and the maintenance intervals. These operating instructions only describe the cleaning station TCS-
Compact. The cleaning station TCS-Compact may only be operated using original ABICOR BINZEL spare
parts.
1.1 EU Declaration of Conformity
according to the EC Directive
Machinery Directive 2006/42/EC
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction and in the present version, the product
described in these operating instructions complies with the basic safety and health requirements of the EC
directive. Any modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1
1.2 Responsibilities of the User
Within the EEA (European Economic Area), the current version of the national implementation of the
Framework Directive (89/391/EEC) and the related individual directives and, of these, especially Directive
(89/655/EEC) concerning the minimum safety and health requirements for the use of work equipment by
workers at work must be adhered to.
In Germany, the Labor Protection Law and the Company Safety Ordinance must be heeded. In addition,
the operator must ensure that the welding torch and welding unit comply with the EC EMC Directive
(2004/108/EC) and that the signal utilisation of the integrated welding current monitoring against stray
currents is installed properly.

2 Product description

2.1 Designated use
The cleaning station TCS-Compact forms part of the welding system and is intended for robot use.
Designated use also includes the observance of the prescribed operating, maintenance and servicing
instructions.
2.2 Use contrary to the designated use
Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorized conversions or power increase modifications are not allowed.
Cleaning station TCS-Compact
Machinery Directive 2006/42/EC
DIN EN ISO 12 100
Information regarding the EU Declaration of Conformity
1 Identification
EN - 3