Support Dish - Silvercrest SEGS 2300 A1 Bedienungsanleitung

4. Upon delivery, the heating element 15
is attached to the grill 14 with cable
ties (see markings in the image). Care-
fully cut the cable ties using scissors.
5. Slide the connection end of the heating
element 15 through the thermostat hold-
er 38. Place the frame of the heating el-
ement 15 onto the 4 holders 34.
6. The frame of the heating element 15
must sit in all 4 holders 34 as shown.
12 GB
5.2

Support dish

1. Slide the lid holder 37 from outside
through the round holes in the holders
on the inside of the support dish 22.
35
6
2. Mount the two fastening plates 35 and
screw each of them in place with
2 screws 6.