Bottom part of the barbecue
3
4
5
29
1. From the inside of the bottom part 23,
attach the legs 29/30 using one sili-
cone ring 5, one washer 4 and one
screw 3 each.
Ensure that you mount the leg 29
with threaded holes at both ends
opposite the oval recess in the
edge (see image).
7
2. Place the thermostat holder 38 from out-
side into the oval recess in the bottom
part 23.
3. Fix the thermostat holder 38 using the
screws 7 and nuts 8 in the small holes
in the bottom part 23.
30
8
38
Heating element
In the next assembly step, the 4 recesses in
the edge of the bottom part 23 are used to
mount the holders 34:
1. Insert the holder 34 through the recess
upright (approx. up to the dotted line in
the image).
2. Rotate the holder 34 90° and lower it
down.
3. Press the holder 34 into position from
outside. The small end must click into
place at the top.
11
GB