Optimum Start/Stop Function - HomeMatic IP HmIP-WTH-2 Montage- Und Bedienungsanleitung

Operating modes and configuration
entire week for your heating profile and confirm
by pressing the control wheel briefly.
• Confirm the start time 00:00 by pressing the
control wheel briefly.
• Select the desired temperature for the start time
by turning the control wheel and confirm by
pressing the control wheel briefly.
• The next time is shown in the display. You can
change this time using the control wheel.
• Select the desired temperature for the next
period by turning the control wheel and confirm
by pressing the control wheel briefly.
• Repeat this procedure until temperatures are
stored for the entire period between 0:00 and
23:59h.
6.5.4

Optimum start/stop function

To reach the desired temperature in the room at the
defined time you can activate the optimum start/stop
function.
• Select "On" for activating or "OFF" for deactivating
the function in the menu item "OSSF" by turning
the control wheel (E) and confirm by pressing the
control wheel briefly.
74