Holiday Mode - HomeMatic IP HmIP-WTH-2 Montage- Und Bedienungsanleitung

You can fully close or open the vale by turning the
control wheel (E) as far as it will go in an anti-
clockwise or clockwise direction. "OFF" or "On" is
displayed.
6.3

Holiday mode

The holiday mode can be used if you want to maintain a
fixed temperature for a certain period (e.g. during your
holidays or a party). To activate the holiday mode, please
proceed as follows:
Press and hold down the control wheel (E) to
•
open the configuration menu.
• Select the
wheel and confirm by pressing the control wheel
briefly.
• Select the start time and date by turning the
control wheel and confirm by pressing the
control wheel briefly. "S" indicates a start time.
• Select the end time and date by turning the
control wheel and confirm by pressing the
control wheel briefly. "E" indicates an end time.
• Set the temperature that you want to maintain
during the defined time using the control wheel
and confirm by pressing the control wheel briefly.
• Select by turning the control wheel in which
rooms you want to activate the holiday mode:
"OnE": Holiday mode is activated for the current
wall thermostat.
Operating modes and configuration
symbol by turning the control
67