Operating Lock; Programming Of Heating Profiles - HomeMatic IP HmIP-WTH-2 Montage- Und Bedienungsanleitung

Operating modes and configuration
"ALL": Holiday mode is activated for all wall ther-
mostats that are connected to the floor heating
actuator.
6.4

Operating lock

Operation of the device can be locked to avoid settings
being changed unintended (e.g. through involuntary
touch). To activate the operating lock, please proceed as
follows:
Press and hold down the control wheel (E) to
•
open the configuration menu.
• Select the
and confirm by pressing the control wheel briefly.
• Turn the control wheel to select "On" in order to
activate the operating lock or "OFF" to deactivate
the operating lock.
If the operating lock is activated you can only
enter the menu item "Operating lock" ( ) via the
configuration menu. You can deactivate the
operating lock here.
6.5

Programming of heating profiles

You can use this menu item for configuring heating and
cooling profiles and to adjust the week profiles according
to your personal needs.
Press and hold down the control wheel (E) to
•
open the configuration menu.
68
symbol by turning the control wheel