HomeMatic IP HmIP-WTH-2 Montage- Und Bedienungsanleitung Seite 65

the configuration menu. To do this, proceed as follows:
• Press and hold down the control wheel (E) to
open the configuration menu.
• Select the desired symbol by turning the control
wheel and pressing it briefly if you want to adjust
the settings of the following menu items.
Press and hold down the control wheel to get
back
automatically closes without applying changes if
there is no operation for more than 1 minute.
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
Operating modes and configuration
to the previous
Automatic mode
Manual operation
Holiday mode
Operating lock
Programming of heating profiles
Date and time
Offset temperature
Selecting the desired temperature display
Configuring the floor heating actuator
Communication test
level. The menu
65