Structure Of The Output Buffer For Various Commands - Balluff BIS U-6026-034-104-06-ST35 Betriebsanleitung

BIS U-6026-034-1_4-06-ST35
Processor unit
8
Device function (continued)
8.1.6 Structure of the output buffer for various
commands
Command designator 00
hex
Sub- Meaning
address
00 1st bit
hex
string
01 Command 00
hex hex
recognition
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
www.balluff.com
: No command present
Functional description
: no command present.
Command designator 81
hex
data carrier (USER data)
Sub- Meaning
address
00 1st bit
hex
string
01 Command 81
hex hex
recognition data).
02 Start Start address (Low Byte) from
hex
address 1 which reading is to start.
(Low Byte)
03 Start Start address (Middle Byte) from
hex
address which reading is to start.
2 (Middle
Byte)
Start Start address (High Byte) from
04
hex
address 3 which reading is to start.
(High Byte)
05 Number of The number of bytes (Low Byte)
hex
bytes 1 that are to be read starting from
(Low Byte) the start address.
06 Number of The number of bytes (Middle
hex
bytes 2 Byte) that are to be read starting
(Middle from the start address.
Byte)
07 Number of The number of bytes (High Byte)
hex
bytes 3 that are to be read starting from
(High Byte) the start address.
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
If execution is successful, the response is passed to the
input buffer in the following format:
Sub- Meaning
address
00 1st bit
hex
string
01 Data Transmission of data that was
hex
read from the data carrier.
... Data Transmission of data that was
read from the data carrier.
... is continued, if necessary, in
further buffer transmissions until
the total number of bytes is
reached.
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
or 01 : Read individual
hex
Functional description
: read data carrier (USER
Functional description
english 25