Installation - Balluff BIS U-6026-034-104-06-ST35 Betriebsanleitung

BIS U-6026-034-1_4-06-ST35
Processor unit
4

Installation

4.1 Processor unit installation
20
59,8
Fig. 4-1: Installation
CAUTION
Danger due to ultra high-frequency electromagnetic
waves
The antennas of the identification system BIS U transmit
ultra-high frequency electromagnetic waves.
► The installation position of the processor unit and
antennas must guarantee a safety distance between
the antennas and the workplaces of personnel. For
safety distances, see chapter Safety on page 6.
The read/write distance can typically be as great as 6 m
depending on the ambient conditions and installed system
components. See the "Basic UHF manual" for more
information on minimum/maximum distances.
1. Select a suitable installation position.
2. Secure the processor unit using four M5 screws
(strength category 8.8, lightly oiled, tightening torque
M = 5.2 Nm).
Optional mounting plates are available for
installing the processor unit (see Accessories on
page 45).
www.balluff.com
107,6
54 20
M5
88
english 11