Balluff BIS U-6026-034-104-06-ST35 Betriebsanleitung Seite 75

BIS U-6026-034-1_4-06-ST35
Processor unit
8
Device function (continued)
Command designator 82
hex
individual data carrier (USER data)
Sub- Meaning
address
00 1st bit
hex
string
01 Command 82
hex hex
recognition (USER data).
02 Start Start address (Low Byte) from
hex
address 1 which writing is to start.
(Low Byte)
03 Start Start address (Middle Byte) from
hex
address 2 which writing is to start.
(Middle
Byte)
Start Start address (High Byte) from
04
hex
address 3 which writing is to start.
(High Byte)
05 Number of The number of bytes that are to
hex
bytes 1 be written starting from the start
(Low Byte) address (Low Byte).
06 Number of The number of bytes that are to
hex
bytes 2 be written starting from the start
(Middle address (Middle Byte).
Byte)
07 Number of The number of bytes that are to
hex
bytes 3 be written starting from the start
(High Byte) address (High Byte).
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
Data is accepted from the processor unit only after the
command has been accepted by the processor unit and
acknowledged.
00 1st bit
hex
string
01 Data Transmission of the data that is
hex
to be written to the data carrier.
... Data Transmission of the data that is
to be written to the data carrier.
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
www.balluff.com
or 02 : Write to
hex
Functional description
: Write to data carrier
Command designator 43
hex
individual data carrier (EPC)
Sub- Meaning
address
00 1st bit
hex
string
01 Command 43
hex hex
recognition
02 No. of Even number of bytes (2...62) to
hex
bytes be read beginning with the start
address 00
shortened or extended to this
length.
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
Data is accepted from the processor unit only after the
command has been accepted by the processor unit and
acknowledged.
Sub- Meaning
address
00 1st bit
hex
string
01 Data Transmission of the data that is
hex
to be written to the data carrier.
... Data Transmission of the data that is
to be written to the data carrier.
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
or 04 : Write to
hex
Functional description
: Write to data carrier (EPC).
. The EPC may be
hex
Functional description
english 27