Notes To The User; About This Guide; Symbols And Conventions; Scope Of Delivery - Balluff BIS U-6026-034-104-06-ST35 Betriebsanleitung

BIS U-6026-034-1_4-06-ST35
Processor unit
1

Notes to the user

1.1

About this guide

This guide describes the processor unit for the
identification systems BIS U-6026 and startup instructions
for immediate operation.
This guide is intended for qualified technical personnel.
Read this guide before installing and operating the
processor unit.
1.2

Symbols and conventions

Individual actions are indicated by a preceding triangle.
► Instruction 1
⇒ Action result.
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals (e.g.
23). Hexadecimal numbers are shown with the additional
indicator hex (e.g. 00 ).
hex
Buttons or selectable menu entries are described in italic
and small caps, e.g. S .
ave
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BIS U-6026
– 5× closure cap
– Safety notes
For corresponding technical documents as well
as additional information on available software
and accessories, see www.balluff.com.
www.balluff.com
1.4

Abbreviations

BIS Balluff Identification System
CRC Cyclic Redundancy Check
EDS Electronic Data Sheet
EEPROM Electrical Erasable and Programmable ROM
EIRP Equivalent Isotropically Radiated Power
EMC Electromagnetic Compatibility
EPC Electronic Product Code
TM
ERP Effective Radiated Power
FCC Federal Communications Commission
IC Industry Canada
IP Internet Protocol
LBT Listen Before Talk
LF CR Line Feed with Carriage Return
MAC Media Access Control
n. c. not connected
PC Personal Computer
PLC Programmable Logic Controller
Tag Data carrier with antenna
TID Tag Identifier
UHF Ultra-high Frequency
english 5