Balluff BIS U-6026-034-104-06-ST35 Betriebsanleitung Seite 80

BIS U-6026-034-1_4-06-ST35
Processor unit
8
Device function (continued)
Command designator 41
carrier selection)
Sub- Meaning
address
00 1st bit
hex
string
01 Command 41
hex
recognition data carrier selection)
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
The Unselect command undoes a data carrier selection for
an antenna. If no selection was made, the status remains
unchanged.
Subsequent read/write commands then refer to any
individual data carrier in the field of the antenna. If multiple
data carriers are in the field of the antenna, the following
read/write commands are ended with an error and status
code 0E (multiple data carriers).
hex
Command identifier 61
hex
Sub- Meaning
address
00 1st bit
hex
string
01 Command 61
hex
recognition
02 Outputs to 01
hex
be set (bit 1
mask)
02
2
04
3
08
4
Combinations are possible, e.g.
0D
Outputs 1, 2 and 4, other
outputs remain unaffected.
03 Value to be 00
hex
set
01
02
03
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
32 english
: Unselect (undo the data
hex
Functional description
: Unselect (undo the fixed
hex
: Set IO outputs
Functional description
: Set IO outputs
hex
= 00000001 = Set Output
hex b
= 00000010 = Set Output
hex b
= 00000100 = Set Output
hex b
= 00001000 = Set Output
hex b
= 00001101 = Set
hex b
= Set outputs to 0
hex
= Set outputs to 1
hex
= Invert outputs
hex
= Outputs flash (0.5 s)
hex
Command identifier 62 : Read IO inputs
hex
Sub- Meaning
address
00 1st bit
hex
string
01 Command 62
hex hex
recognition
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
If execution is successful, the response is passed to the
input buffer in the following format:
Sub- Meaning
address
00 1st bit
hex
string
01 Status 00
hex hex
values (bit In 2 Low
mask)
01
hex
In 2 Low
02
hex
In 2 High
03
hex
In 2 High
... None No meaning
Last 2nd bit If first and second bit strings
byte string agree, there is valid data
present.
Functional description
: Read IO inputs
Functional description
= 00000000 = In 1 Low,
b
= 00000001 = In 1 High,
b
= 00000010 = In 1 Low,
b
= 00000011 = In 1 High,
b