Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Parkside PSGS 120 A1 Bedienungs- Und Sicherheitshinweise

4-in-1-kompaktschweissgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14

Safety instructions

Safety instructions
Please read the operating instruc-
tions with care and observe the
notes described. Familiarise your-
self with the device, its proper
use and the safety instructions
based on these operating instruc-
tions. The rating plate contains
all technical data of this welding
device; please learn about the
technical features of this device.
packaging material away from
small children. There is a risk
of suffocation!
This device may be used by
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
been instructed in how to use
the device safely and under-
stand the dangers that may arise
when using it. Do not allow
children to play with the device.
Cleaning and day-to-day mainte-
nance must not be performed by
children without supervision.
Repairs and/or maintenance
work must only be carried out
by qualified electricians.
38
GB/IE
Keep the
Only use the weld cable pro-
vided in the scope of delivery.
During operation, the device
should not be positioned
directly on the wall, covered or
jammed between other devices
so that sufficient air can be
absorbed through the ventila-
tion slats. Make sure that the
device is correctly connected
to the supply voltage. Avoid
any form of tensile stress of
the power cable. Disconnect
the plug from the socket prior
to setting up the device in
another location.
If the device is not in opera-
tion, always switch it off by
pressing the ON/OFF switch.
Place the electrode holder on
an insulated surface and only
remove it from the holder after
allowing it to cool down for
15 minutes.
Pay attention to the condition
of the welding cable, electrode
holder and the earth terminal.
Wear and tear of the insu-
lation and the live parts can
lead to hazards and reduce
the quality of the welding
work.
Arc welding creates sparks,
molten metal parts and
smoke. Therefore ensure that:

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 332971_1907

Inhaltsverzeichnis